UV-B Sensor - GUVB-T11GD-L
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
UV-A Sensor - GUVA-S12SD
GUVA-S12SD UV sensor, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV Index Monitoring and UV-A Lamp Monitoring.
UVA Sensor - SKU 421
SKU 421 UVA sensor is used to measure 315 ~ 400nm in UV band. It has strong penetration and can penetrate most transparent glass and plastics.
UV photodiode - GT-UVV-LW
Chip size 1 mm2, TO46 metal package with sapphire window, high sensitivity and low leakage, spectral response range 350-440 nm.
Waterproof UV Sensor for Pantograph Arc Detection - UV-Arc
UV-Arc is a waterproof sensor with a male threaded body (G3/4) to be used on trains to measure intensity and length of pantograph arcs according to EN 50317.
UV Sensors - SUV13/SUV20
Our UV-sensors are available in different designs and are suitable for operation in air as well as water systems.
UVC Photodetector with Integrated Amplifier - TOCON_C1
TOCON_C1 UVC photodetector with integrated amplifier, Irradiance limits approx. 14 pW/cm2 ... 135 nW/cm2, TO5, fire detection, broad field of view.
Integrated Low Voltage I2C Ambient Light and Ultraviolet Light Sensor - LTR-390UV-01
LTR-390UV-01 is an integrated low voltage I2C ambient light and ultraviolet light sensor in a single miniature 2x2mm chipled lead-free surface mount package.
Transmitter (Voltage Amplifier) of Photocurrent to 0 - 5 V Signal - VOLTCON Series
The VOLTCON converts a photocurrent into an output voltage between 0 and 5 V and can be connected to any PLC system.
Versatile Radiation Controller for Industry and Science - RADIKON
RADIKON Versatile radiation controller for industry and science, used to control the value generated by a detector (e.g. radiation sensor or a pressure sensor).
Multifunctional 2-Channel Photodiode Amplifier - Multiboard (TW-MF2CAB)
Multiboard (TW-MF2CAB) Multifunctional 2-Channel Photodiode Amplifier, well suited for experimental setup and small series.
Transimpedance Amplifier Board - Digiboard
Digiboard ?Transimpedance Amplifier Board. wide single supply voltage range 5.0 - 18.0 V with surge and polarity protection. low power consumption.
Transmitter (Current Amplifier) of Photocurrent to 4 - 20mA Current Loop - AMPCON Series
The AMPCON converts a photocurrent to an industry standard current loop signal. It exhibits a loop-powered (passive) 4 to 20 mA sensor to any PLC system.
UV Reflectance and Fluorescence Sensor - GUVF-S31SD
GUVF-S31SD UV Reflectance and Fluorescence Sensor, Multi-Sensor for detecting UV and visible range light, Money detecting, Counterfeits bill detecting.
Digital UV Sensor - GUVB-C31SM
UV Sensor GUVB-C31SM supports integrated functions of an ultraviolet light sensor such that can be easily configured and used in user applications.
UV-B Sensor - GUVB-S31GD
UV Sensor GUVB-S31GD, Aluminium Gallium Nitride Based Material, Good Visible Blindness. Mainly apply to UV-B Lamp Monitoring and UV Index Monitoring.
UV-A Sensor - GUVA-C22SD
UV Sensor GUVA-C22SD, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV Index Monitoring and UV-A Lamp Monitoring.
Flame Sensors for Fuel Oil Burners - FC Series
FC Series Photocells Flame Sensors for Fuel Oil Burners, this property is exploited to detect the occurred flame generation in burners.
UVB+UVC Photodetector with Integrated Amplifier - TOCON_B4
TOCON_B4 UVB+UVC SiC based UV photodetector with integrated amplifier. 0 - 5 V voltage output, max. 7.5 μW/cm2, TO5 + diffusor. UVB irradiation measurement.
GaP Blue Light Detector with Integrated Amplifier - TOCON_BLUE4
TOCON_BLUE4 GaP blue light detector, 0 - 5 V voltage output, Irradiance limits approx. 4.2 nW/cm2 ... 43 μW/cm2. measurement of very low blue light irradiation.
UVC Photodetector with Integrated Amplifier - TOCON_C2
TOCON_C2 UVC photodetector with integrated amplifier, UVC, approx. 18 pW/cm2 ... 180 nW/cm2, TO5 lens cap, low UVC radiation detection, occupational safety.
UVA Photodetector with Integrated Amplifier - TOCON_A4
TOCON_A4 UVA photodetector with integrated amplifier, approx. 1.8 nW/cm2 ... 18 μW/cm2, TO5 lens cap, UVA radiation detection.
SiC Based UV-Index Photodetector with Integrated Amplifier - TOCON_E_OEM
TOCON_E_OEM SiC based UV-Index photodetector with integrated amplifier. 0 - 5 V voltage output. 1 UVI results a voltage of approx 0.5 V. UV-Index measurement.
SiC Based UV-Index Photodetector with Integrated Amplifier - TOCON_E1
TOCON_E1 UV-Index photodetector with integrated amplifier, for UV-Index measurements up to 3 UVI, compliant to CIE087 / DIN5050,
SiC Based UV-Index Photodetector with Integrated Amplifier - TOCON_E2
TOCON_E2 UV-Index photodetector, for UV-Index measurements up to 30 UVI, compliant to CIE087 / DIN5050,
GaP Detector with Integrated Amplifier - TOCON_GaP4
TOCON_GaP4 GaP detector with integrated amplifier. Irradiance limits approx. 0.9 nW/cm2 ... 9 μW/cm2, TO5 + diffusor.
SiC UV photodetector - TOCON-ABC10
TOCON-ABC10 Broadband SiC based UV photodetector with integrated amplifier. 0-5 V voltage output, peak wavelength at 290 nm, max. radiation at peak is 18 W/cm2
SiC UV photodetector - TOCON_ABC1
TOCON_ABC1 Broadband SiC based UV photodetector, 0 - 5 V voltage output, peak wavelength at 280 nm, max. radiation (saturation limit) at peak is 18 nW/cm2.
UV Sensor for Fuel Oil and Gas Burners - FD1/S - FD2/S
Flame detection device for fuel oil and gas burners equipped with Brahma safety device for gas. The sensor has no direct contact with the flame.
UV Sensor for Fuel Oil and Gas Burners - FD1xx - FD2xx
The FDx sensor uses a silicon preamplified active element, specifically designed for blue flame burner applications; the UV light peak detection of this sensor.
Flame Sensors For Gas Burners - UV1 UV2 UV3
UV1 UV2 UV3 Flame Sensors are used for flame detection in gas and mixed fuel (gas and oil) burners.
UV Photodiode - EOPD-265-0-0.3-CC
EOPD-265-0-0.3-CC UV Photodiode, Low cost SiC photodiode with high spectral sensitivity in the UV range (205 nm - 355 nm).
UV Photodiode - EOPD-265-0-0.5-CC
EOPD-265-0-0.5-CC UV Photodiode, Low cost SiC photodiode with high spectral sensitivity in the UV range (205 nm - 355 nm).
GaN-based UV Photodiode - GS-AB-0603E
GS-AB-0603E GaN-based UV Photodiode, UVA+UVB photodiode. for UV index monitoring, UV radiation dose measurement, flame detection.
GaN-based UV Photodiode - GS-ABC-2016S
GS-ABC-2016S UV Photodiode, Broad band UVA+UVB+UVC photodiode. For UV index monitoring, UV radiation dose measurement, flame detection。
GaN-based UV Photodiode - GS-ABC-3528Q
GS-ABC-3528Q GaN-based UV photodiode, UVA+UVB+UVC photodiode, for UV index monitoring, UV radiation dose measurement, flame detection.
GaN-based UV Photodiode - GT-ABC-L
GT-ABC-L GaN-based UV photodiode, TO-46 metal housing, for UV index monitoring, UV radiation dose measurement, flame detection
SiC-based UV Photodiode - ST-ABC-L
ST-ABC-L UV Photodiode, Broad band UVA+UVB+UVC photodiode. For UV index monitoring, UV radiation dose measurement, flame detection.
SiC-based UV Photodiode - ST-ABC-M
ST-ABC-M UV Photodiode, Broad band UVA+UVB+UVC photodiode, TO-46 metal housing. for UV index monitoring, UV radiation dose measurement, flame detection.
High Precision UV-Index Photodiode - SG01M-E18 (ERYCA_custom)
SG01M-E18 is high precision UV-Index photodiode with 0.2 mm2 detector area, TO18 housing. It is for UV index measurement acc.
High Precision UV-Index Photodiode - SG01D-E18 (ERYCA_custom)
SG01D-E18 (ERYCA_custom) is high precision UV-Index photodiode with 0.5 mm2 detect area, TO18 housing. It is for UV index measurement acc.
High Precision UV-Index Photodiode - SG01L-E5 (ERYCA_advanced)
SG01L-E5 (ERYCA_advanced) is UV-Index Photodiode with 1.00 mm2 detector area, TO5 housing, cosine corrected, for UV index measurement acc.
High Precision UV-Index Photodiode - SG01XL-E5 (ERYCA_science)
SG01XL-E5 (ERYCA_science) is UV-Index Photodiode with 7.6 mm2 detector area, TO5 housing, cosine corrected, for UV index measurement acc.
Concentrator Lens SiC Based UV Photodiode - SG01L-5LENS
SG01L-5LENS UV Photodiode, 55 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx. 700 nA. Responsivity Range: 221-358 nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01S-C18
SG01S-C18 is UVC photodiode with 0.06 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 720 nA. Responsivity Range: 225-28nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01S-C5
SG01S-C5 is UVC photodiode with 0.06 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 720 nA. Responsivity Range: 225-287 nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01M-C5
SG01M-C5 is UVC photodiode with 0.2 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 2400 nA. Responsivity Range: 225-287nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18
SG01D-C18 is UVC photodiode with 0.5 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 6 nA. Responsivity Range: 225-287 nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01L-C5
SG01L-C5 is UVC photodiode with1.0 mm2 detector area,TO5 housing. 10μW/cm2 peak radiation results a current of approx 12 nA. Responsivity Range: 225 - 287 nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01L-C18
SG01L-C18 is UVC photodiode with 1.00 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 12 nA. Responsivity Range: 225-287nm.
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01XL-C5
SG01XL-C5 is UVC photodiode with 7.6 mm2 detector area, TO5 housing. Mainly apply to fire control, water treatment, UV astronomy, UV index measure...etc.
UVA-only SiC Based UV Photodiode A = 0.20 mm2 - SG01M-A18
SG01M-A18 UV Photodiode, 0.2 mm2 detector area. TO18 housing. 10mW/cm2 peak radiation results a current of approx 740 nA. Responsivity Range: 309-367nm.
UVA-only SiC Based UV Photodiode A = 0.50 mm2 - SG01D-A18
SG01D-A18 is UVA photodiodes with 0.5 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 1.85nA . Responsivity Range 309-367nm
Home
|
Welcome to ISweek,
